Free Drywall Installation Tips!
Drywall installations appear so unassumingly simple that people often take them for granted. However, for those considering remodeling projects that need to execute drywall installation, these free drywall installation tips will surely be appreciated.
First, it is best to take advantage of each drywall full sheet by planning the position of the first drywall panel. Try to limit the number of seams in a project by using full sheets when installing the drywall. Start working on the ceilings first before proceeding to the walls. Have a filler strip installed, if needed, at the bottom part of the wall where it can be hidden into view by the baseboard.
Among the useful free drywall installation tips is the finishing of the drywall seams. Drywall joint compounds display different reactions in different kinds of weather. Dry and hot weather speeds up the drying process while wet weather slows it down. This may cause confusion if the dryness is to be judged by the joint compound’s appearance. Awareness of this factor can help prevent serious and costly problems. The type of weather during a particular installation project can definitely affect the quality and performance of the joint compounds.
During extremely warm and dry weather, it is suggested to have the windows and the doors closed to prevent drafts that will shorten the drying period for joint compounds. Edge cracking and check cracking will result if rapid air moves against the joints, specifically whenever the mixture applied is of thin consistency.
Another indispensable free drywall installation tip is to manipulate the humidity around one’s remodeling work area. This can be done by manually sprinkling the subfloors with cold water and surrounding the work area with large water filled open containers. It will also be wise to use quality joint compounds that are capable to harden quickly to avoid the negative effects of having quick drying conditions.
A logical free drywall installation tip is to control the time and water factors in the mixture. Shorten the time by working on short joint lengths so that each section is sufficiently finished before the compound dries out. Do not add too much water to the joint compound. It can offer extra working time but too much of it can cause shrinkage.
In humid and wet weather conditions, give time for each drywall joint compound coat to dry before applying the subsequent coats. Use the type of joint compounds that are not affected by fluctuating or high humidity. These types are the setting-type lightweight joint compounds. A visual inspection is not enough in checking joint dryness. Powder compounds and tapes should not be stored in damp areas. This is one important free drywall installation tip as the working qualities of these materials can be affected negatively by dampness.
In all weather conditions, here are other significant free drywall installation tips. Keep clean at all times all the tools and mixing containers used in working. Likewise, the water used for mixing should always be clean. The powder compounds should be added to the water when making the mixture, and not the other way around, water to powder. Do not forget to sift the compounds while being poured. Always remove all the sanding dust away from the surfaces before decorating. Painting should be done only after the joints are completely dry. Joint discoloration will occur if paint is applied over wet joints.
Installing drywall can be fun and rewarding, especially when one is equipped with the right tools and tips.
Other Related Posts
« Go Green with Environmentally-Friendly Plumbing Practices | Home
Leave a Comment